1/8 in to 5/8 in Mini Tube Cutter for Copper, Aluminum, Steel, PVC an

1/8–5/8 in Mini Tube Cutter for Metal & Plastic Pipes

$11.99

$11.99 $19.99

Can cut thin copper tube, for titanium tube and thin aluminum tube.
Do not cut round pipes made of hard and thick metal materials, and can only be used on round pipes made of thin-walled and low-hardness materials.
Double bearing design: to ensure a stable pipe, fast and smooth cutting.
During the cutting process, the tightness can be adjusted appropriately until the cutting is broken.
Mini cutters are used for construction operations in places where the space is relatively small.

COMPACT CUTTING CONTROL

Clean, Controlled Tube Cutting in Tight Spaces

A compact tube cutter with an adjustable 1/8–5/8 inch outside-diameter range for plumbing, HVAC/R, repair and DIY applications.

1/8–5/8 in Range Compact Profile Adjustable Cutting Wheel

SMALL TOOL, PRACTICAL PERFORMANCE

Designed for Pipes with Limited Working Clearance

The mini body requires less rotation space than many full-size cutters, making it useful behind fixtures, near walls and inside crowded equipment areas. Its adjustment wheel lets you gradually increase cutting pressure for a more controlled result.

1/8–5/8 in

Outside Diameter Range

3–16 MM CAPACITY

Adjustable for a Variety of Small Tubes

Turn the adjustment wheel to position the cutter around compatible tubing, then advance the blade gradually as you rotate the tool.

01

Compact Body

Easier to rotate in confined areas where a longer handle would be difficult to use.

02

Tungsten Steel Wheel

The cutting wheel is designed for controlled scoring and repeated rotation around the tube.

03

Gradual Adjustment

The textured control wheel allows cutting pressure to be increased in small steps.

04

Portable Tool

Small enough to keep in a plumbing, HVAC/R or household repair toolbox.

MULTI-MATERIAL APPLICATIONS

Suitable for Compatible Metal & Plastic Tubing

Material hardness and wall thickness affect cutting performance. Always confirm that the tubing falls within the cutter’s stated capacity.

Copper Tubing

Aluminum Tubing

Compatible Steel Tubing

Plastic & PVC Tubing

CONTROLLED STEP-BY-STEP CUTTING

How to Cut a Tube

1

Mark the Tube

Measure carefully and mark the exact location where the cut is required.

2

Position the Cutter

Place the tube between the rollers and cutting wheel, aligning the blade with the mark.

3

Rotate Evenly

Tighten lightly and rotate the tool around the tube to create an even score.

4

Advance Gradually

Increase pressure in small steps and continue rotating until the tube separates.

FOR PROFESSIONALS & DIY USERS

A Practical Addition to Your Repair Kit

Plumbing Repairs

HVAC/R Installation

Appliance Maintenance

Home DIY Projects

Product Details

Product Type Mini adjustable tube cutter

Cutting Range 1/8–5/8 in outside diameter

Metric Range Approximately 3–16 mm outside diameter

Cutting Component Tungsten steel cutting wheel

Recommended Use Plumbing, HVAC/R, maintenance and DIY work

Material Compatibility

The stated range refers to tube outside diameter. Cutting suitability also depends on material hardness, wall thickness and condition. This cutter may not be suitable for hardened, reinforced or thick-wall pipe. Confirm the selected product specifications before use.

Safe Use

Never cut a live, pressurized or energized line. Shut off and verify all relevant water, gas, refrigerant and electrical services before beginning. Wear suitable eye and hand protection, secure the tube where appropriate and deburr sharp cut edges before installation.

Compact Enough for Tight Spaces, Ready for Everyday Repairs

Measure, position, rotate and cut with controlled pressure.

1/8–5/8 in Mini Tube Cutter for Metal & Plastic Pipes

Clean, Controlled Tube Cutting in Tight Spaces